Rockwell Hardness Tester HR-150DT

Rockwell Hardness Tester HR-150DT
The HR-150DT Rockwell hardness tester, appreciated for its accuracy and easy operation, works entirely conforming to the international Rockwell standard. Depending on the combination of indenter type and applied total test force, a unique symbol is given to each Rockwell scale. The HR-150DT features both specific Rockwell scale HRC and HRB on a dial. The appropriate force should be adjusted manually, using the dial on the right side of the machine. After application of the preliminary force, the HR-150DT will proceed with a full automatic test: loading, duration, unloading, and will display the hardness directly.
Applications:
• Cemented carbide
• Thin steel plates
• Case hardened steel
• Copper
• Bearing metal
• Annealed steel
• Brass
• Hard-drawn aluminum alloys
• Beryllium copper
• Phosphor bronz
Specifications:
• Preliminary test force (minor load): 98.07N(10k9f)
• Test force (test load): 588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)
• Table up/down drive: Manual
• Load application: Automatic (loading-duration-release)
• Load duration: 0s to 30s (specified in 1s increments)
• Display: Dial
• Hardness scales: HRC, HRB
• Hardness increment: 0.1 (for each scale)
Specimen:
• Maximum height: 170mm (6.7")
• Maximum depth: 165mm (6.5") from center of indenter shaft
• Power supply: 220 V AC/50/60Hz
• Dimensions (WxDxH): 215x500x750mm (8.46x19.68x29.53")
• Mass: 85k